How to Spray Paint with Smooth Success
Article author Aja Klena is the design consultant and senior staff writer for http://www.metal-wall-art.com. Visit the store for a distinctive tree wall decor and metal wall sculptures.
Spray paint is an easier way to get great results on small items that have nooks and crannies or uneven surfaces. Use it to turn an old piece of furniture into a decorative accent that perfectly matches other colors in your room; or unify a group of disparate frames with one can of spray paint. How about turning plain clay pots into colorful containers for your favorite flowers? Spray paint comes in a rainbow of colors and types so you can find spray paint that will work on wood, plastic and metal and even cover up rust.
Because spray paint doesn’t leave brush stroke marks behind, it’s not only quick and easy to use, it gives you a more uniform, professional finish. If you have never tried spray painting before, realize that it takes a little time and practice to become skilled and precise, so you may want to try your hand first on objects that don’t mean the world to you. We can get you off on the right foot with these helpful tips and before you know it, you will be painting everything in sight!
Preparations & Precautions
Before you start painting, wipe down your target item to remove and dust and dirt; be sure that any grease or oil is thoroughly cleaned from the surface. Using a spray primer before the paint will ensure good adhesion and a smoother finish. It is best to work outdoors if possible, but definitely in a well-ventilated area. If the weather is extremely humid and windy, wait for a dryer, calmer day. Do not use or store spray paint near a heat source as it is extremely flammable.
Protect the area underneath the item with drop cloths or newspaper and set up a cardboard screen to catch any overspray behind the item. Shake the can repeatedly to thoroughly mix the paint before beginning. You may also have to shake it from time to time as you proceed.
The Process
To achieve professional results, the paint must be applied in thin coats, letting each coat dry thoroughly before applying the next. Applying the paint heavily will result in runs and drips.
Holding the can about ten inches from the item, depress the nozzle and use a quick sweeping motion from side to side. If an area needs more coverage, let the first coat dry and apply a second or third as needed. If a drip or run should occur, let the paint dry completely and then lightly sand away the flaw; then spray on another thin layer of paint.
When you are finished and happy with the results, do not handle the item until the paint is completely dry; refer to the can for average dry times but allow for differences in weather conditions. If there is paint left in the can, hold the can upside down and depress the nozzle for approximately five seconds to clear the nozzle. Be sure that a can is empty before placing it in the trash.
For Bigger Jobs
There are sprayers available at your local home improvement store that can be used for bigger projects like painting the interior or exterior of your home or a large object. These sprayers can be quite expensive and often require additional equipment, such as a compressor. Such equipment may be worthwhile if you are skilled enough to do a professional job and if you have more than a one-time use for the equipment.
Most of the services reviewed by this website are available or may be accessed from Australia (see 